Bizhub 200 PCB location

[Holesaletech27]

Hello everyone! I need to pull a pwb A board from a Konica Minolta Bizhub 200 and I don't have the manual with the component/PCB layout. Can anyone help so I pull the right one? Thanks in advance, I know this is an easy one!

[Hansoon]

"Congrats" its the hardest to reach board hidden under the rear cover. Remove the plastic rear cover first, than remove the metal cage from the electronics than loosen the metal frame carrying the boards you see first, the PWB-M, MFB, PWB-N. Behind this frame with before mentioned boards, you'll find PWB-A. Have some coffee and sandwiches with you before you go there cause there are several thousand of screws to remove......

Hans

[pepper38_cnd]

PWB-A is the main board remove the back cover, remove the metal cover with the grounding strip on it and you will be staring at it. If you get a new board don't forget to tranfer the little chip it does not come with the board.

[Hansoon]

[URL=http://img132.imageshack.us/i/pwbadi200.jpg/]http://img132.imageshack.us/img132/1527/pwbadi200.jpg

Hans

[pepper38_cnd]

Nice picture Hans but that is a Di-200 obviously there are some differences from the Bizhub 200

[Hansoon]

Aww man :o:o:o........

Sorry guys and thanks Pepper!

Since we don't have the BH-200 here in Europe I automatically assumed the Di-200 was the subject.

Hans

[Holesaletech27]

Thank you all for the help!