I am currently suffering from a lack of toner replenishment on a Bizhub Pro 1050.
I followed an engineer into this machine after the Printer Control Board was replaced.
I have changed the Toner Control Board,Potention Board and the Intermediate Hopper Piezoelectric Sensor - the toner pipes are clear and the toner pumps activated through the Input/Output mode.
The toner level indicator on the Machine screen shows full toner levels for Main/Intermediate toner hoppers - I am starting to run out of ideas.
Any suggestions would be gratefully received....
I followed an engineer into this machine after the Printer Control Board was replaced.
I have changed the Toner Control Board,Potention Board and the Intermediate Hopper Piezoelectric Sensor - the toner pipes are clear and the toner pumps activated through the Input/Output mode.
The toner level indicator on the Machine screen shows full toner levels for Main/Intermediate toner hoppers - I am starting to run out of ideas.
Any suggestions would be gratefully received....