[Misc] MINOLTA EP4000

[zaza]

hello to all .. I have a Minolta EP4000 ... my problem in this machine gives me an offset of 10 cm at the edge of attack of the sheet of original .. so how to resolve this discrepancy?

[Cantechman]

Does it happen from the glass and feeder? If so I would look at the sync roller clutch.

[zaza]

l try cleaner this roller cluch ..but it not have any news ..l think I can solve this problem by simulation .. can someone give me the value of the layout?

Does it happen from the glass and feeder? If so I would look at the sync roller clutch.

[tonerspot]

if is the cluch you must have the paper jam at fuser,scan please

[zaza]

no my friend tonerspot ..l have any paper jam ...the EP4000 fonction very good ...but if l started the copy ..I see a shift to start writing about 10cmin copy

[minimerlin]

Does the reg clutch stop to form a buckle at the roller?

[klingeundbeil]

We also need the manual for the Minolta EP 4000

Hi Copy_guy,

we are students from germany and just got an old EP4000 from Minolta for a copy project, but they didnt give us the manual. Could you send it to us, or give us a download link?

My email adress is: post@lorenzklingebiel.com

That would be great!

Cheers,
Lorenz & Nicolas

[Hansoon]

Braucht ihr das Technische Handbuch oder die Gebrauchsanleitung?

Hans

[klingeundbeil]

[JustManuals]

Minolta - products new home -

Minolta - products new home -