View Full Version : Miscellaneous MINOLTA EP4000
hello to all .. I have a Minolta EP4000 ... my problem in this machine gives me an offset of 10 cm at the edge of attack of the sheet of original .. so how to resolve this discrepancy?
Cantechman
11-15-2010, 04:04 AM
Does it happen from the glass and feeder? If so I would look at the sync roller clutch.
l try cleaner this roller cluch ..but it not have any news ..l think I can solve this problem by simulation .. can someone give me the value of the layout?
Does it happen from the glass and feeder? If so I would look at the sync roller clutch.
tonerspot
11-15-2010, 07:42 AM
if is the cluch you must have the paper jam at fuser,scan please
no my friend tonerspot ..l have any paper jam ...the EP4000 fonction very good ...but if l started the copy ..I see a shift to start writing about 10cmin copy
minimerlin
11-15-2010, 10:42 PM
Does the reg clutch stop to form a buckle at the roller?
klingeundbeil
11-19-2010, 03:15 PM
Hi Copy_guy,
we are students from germany and just got an old EP4000 from Minolta for a copy project, but they didnt give us the manual. Could you send it to us, or give us a download link?
My email adress is: post@lorenzklingebiel.com
That would be great!
Cheers,
Lorenz & Nicolas
Hansoon
11-20-2010, 08:26 AM
Braucht ihr das Technische Handbuch oder die Gebrauchsanleitung?
Hans
klingeundbeil
11-20-2010, 01:13 PM
was steht den nohc zusätzlich im technischen handbuch? kann ja eigentlich nicht schaden! also fast du das auch noch hast, wäre super, danke schonmal für die Anleitung!
grüße,
Lorenz
JustManuals
11-20-2010, 11:15 PM
Minolta - products new home - (http://www.justmanuals.com/minolta-copier-40005000-operators-manual-p-34436.html)
Minolta - products new home - (http://www.justmanuals.com/minolta-copier-40005000-parts-service-p-34571.html)
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.