PDA

View Full Version : Bizhub C203 pass


Custom Search


arhonta
11-26-2010, 01:29 PM
Hi guys, I have problem with the CE password and administrator pass of 1 KM C203. PLS help me to change it or remove ti...10x!

spock
11-27-2010, 03:24 AM
Administrator password should just be 12345678, unless it has been modified. CE password could be anything but a popular one is 92729272

backspace
11-27-2010, 08:27 AM
I have the same problem. I tried with passwords "12345678" and "92729272", but nothing

spock
11-27-2010, 02:41 PM
well you can reset the admin password in CE mode but i am not sure if you can reset the CE password without replacing parts on that model. It might be possible with a full run up again maybe someone else can offer advice on that part as ive never had to do it before.

arhonta
11-27-2010, 11:03 PM
What happens if I pull out and let the machine NVRAM, and then go back and reset? The problem that I have is that the machine is lifted "It is time for sheduled inspection of device" that procedure is done every 50 000 copies. But I do not remember whether resetting is administrator or technical menu. If anyone has suggestions to write. Good luck!

racosta
11-29-2010, 07:52 PM
Try these steps....Hope this helps....


11.3 Settings in the Enhanced Security

11.3.1 CE Password
11.3.2 Administrator Password

Functions • To set and change the CE password.
Use • Use to change the CE password.
Setting/
Procedure
• Enter the CE password (8 digits) on the on-screen keyboard.
• The initial setting is “92729272.”
Current Password : Enter the currently using CE password.
New Password : Enter the new CE password.
Re-Input Password : Enter the new CE password again.

NOTE
• When the following setting leads to the Password Rules [ON], the password
with the same letters as well as the password which is same as the previous
one cannot be changed.
[Administrator Settings] → [Security Settings]
• NEVER forget the CE password. When forgetting the CE password, call
responsible person of KMBT.

Functions • To set and change the administrator password.
Use • Use to change the administrator password.
• Use this function when the administrator forget the administrator password because
a new password can be set without entering the current administrator password with
this.
Setting/
Procedure
• Enter the administrator password (8 digits) on the on-screen keyboard.
• The initial setting is “12345678.”
New Password : Enter the new administrator password.
Re-Input Password : Enter the new administrator password again.

NOTE
• When the following setting leads to the Password Rules [ON], the password
with the same letters, the password which is same as the previous one and the
password of less than eight digits cannot be changed.
[Administrator Settings] → [Security Settings]

racosta
11-29-2010, 08:09 PM
11.3.4 CE Authentication

• It will not be displayed when the following settings are set to “ON”.
[Administrator Settings] → [Security Setting] → [Enhanced Security Mode] or [Password
Rules].

Functions • To determine whether or not to authenticate CE password as entering Service Mode.
Use • Use when authenticating CE password as entering Service Mode.

NOTE
• For setting the following setting to “ON”, set the CE Authentication to “ON”
and change the initial CE password beforehand.
[Administrator Settings] → [Security Setting] → [Enhanced Security Mode] or
[Password Rules]

Setting/
Procedure
• The default setting is OFF.
ON “OFF”

arhonta
11-30-2010, 07:18 PM
11.3.4 CE Authentication


• It

will not be displayed when the following settings are set to “ON”.

[Administrator Settings]


→ [Security Setting] → [Enhanced Security Mode] or [Password

R


ules].

F


unctions • To determine whether or not to authenticate CE password as entering Service Mode.

Use • Use


when authenticating CE password as entering Service Mode.

NOTE
• For setting the following setting to “ON”, set the CE Authentication to “ON”
and change the initial CE password beforehand.
[Administrator Settings]


→ [Security Setting] → [Enhanced Security Mode] or

[Password Rules]
Setting/
Proced


ure

• The defa


ult setting is OFF.
ON “OFF”

Try these ways, but without result. Other ideas?

xmasvn
12-06-2010, 09:03 AM
that way you only work with default pass, but when you forgot pass you can reset by this way , i still looking for the way to reset the CE password

arhonta
12-18-2010, 03:29 PM
Well write if you can find something.

RRodgers
12-18-2010, 04:19 PM
I remember them saying in class, if you change the CE password and forget it..... forget it! :) you might need a new NVram. KM might have a back door if you call them, course I don't think they give it out.

xmasvn
12-31-2010, 01:57 AM
that is they said but no one in this forum do that, or they do that but keep secrets for them self i have discussion alot in this problem but no solution to take over this solution

Stirton.M
12-31-2010, 06:28 AM
If there was a way to reset a CE password without knowing the changed password, I am not privy to it. Not like it is a secret or anything. NVRAM reset firmware might work, but I have my doubts.

EarthKmTech
01-01-2011, 11:56 PM
when you initialise the NVram it resets the CE password too.

but from memory you have to totally setup the machine again from scratch and perhaps even format the hard drive - i cant remember.

arhonta
01-04-2011, 07:12 PM
I knew from colleagues that can be reset but they asked for my serial number on the machine. Someone will tell me? arhonta@abv.bg

Custom Search