PDA

View Full Version : Bizhub BW350, scan/fax report


Custom Search


Hansoon
12-02-2010, 09:31 PM
Anybody know if there is a setting to activate ONLY the TX report for faxing? TX-Report for scanning is unwanted however by the customer.

Hans

TheOwl
12-02-2010, 10:00 PM
There is a Software Switch I believe that will change this for.

I don't have a service manual on me, but I also believe that the details of this may have been posted here already.

Mr Spock
12-02-2010, 11:28 PM
Yes it is a soft switch setting.

In the service mode select the soft switch 368.
Set the Bit 1 to 0 for no TX print for every scan. To print TX for every scan, set the bit 1 to 1.
For more detail refer to page 114 of the FK503 Service Manual

Custom Search