PDA

View Full Version : Konica 7020 fuser versus 7022


Custom Search


Hansoon
12-03-2010, 06:26 PM
Can the complete fuser unit from the Konica 7022 be used for the 7020?

Is there a part# for a whole complete unit?

Hans

albasoul06
12-05-2010, 04:38 AM
26WE-5304 for Konica Minolta 7022, 7130
26NE-5307, 26NE-5303 for Konica Minolta 7020, 7025, 7030

SmellsHot
12-05-2010, 02:26 PM
The connector on the fuser is the only real difference, If I'm not mistake you can take the two screws off the connector and flip it upside down and it should work!

Hansoon
12-05-2010, 04:16 PM
Great! Thanks guys!

Hans

mrwho
12-05-2010, 10:10 PM
The connector on the fuser is the only real difference, If I'm not mistake you can take the two screws off the connector and flip it upside down and it should work!

Now that's some handy info I wish I had last week - I'm going to try that ASAP. Thanks for the tip!

Custom Search