Bizhub C250/252 ICP Location/Description

[copytechman]

I know where and what they look like on the c203 series and the older legacy 7145/7222 series and thusly they are usually labelled as well, however for the life of me I can't seem to find them especially ICP5 on the M board for the c250 series, or am I looking in the wrong place entirely? Do they look the same or similar? Any help would be appreciated, (on the c203 series m board they are readily visible!)

Many regards!
A.

[JSC]

From the list I have there is no ICP 5 on the C250/252. the ICP's look just like they do on most of Konica Minolta's machins they are very small and will have ICP and the relevant number writen next to it, also the C250/252 has PSW's on some of the boards these do a similer job but are about 10x bigger.

[copytechman]

Thanks very much! I thought I saw it on an icp list I had, I know the one is icp5 on the c203 series, I'll recheck my board for a psw device, u say it does pretty much the same thing? I'll check that out and let ya know. Once again, thanks much!

A.