printsnow
12-20-2010, 10:18 PM
I have a C2211 error code, we have done everything that Konica suggests:
Replaced IU Motor
Replaced Main Board
Replace Power Supply
Still getting the code - any suggestions? Thanks in advance!
P.S. Computer server that the copier was hooked up to went down, and we have had this error ever since (but we have on surge protector/ethernet protector).
Replaced IU Motor
Replaced Main Board
Replace Power Supply
Still getting the code - any suggestions? Thanks in advance!
P.S. Computer server that the copier was hooked up to went down, and we have had this error ever since (but we have on surge protector/ethernet protector).