PDA

View Full Version : Miscellaneous Develop 353 ( Bizhub C353) bootup screen


Custom Search


bhangdu
12-23-2010, 06:36 AM
Hi All,
Can anyone helpme out
we got develop machine 353 ( Bizhub C353), in this machine the bootup screen is different from bizhub series & I upgraded the latest version but nothing change in bootupscreen logo
How can I change in to Konica-Minolta boot up screen logo????????

Thanks in advance

Stirton.M
12-23-2010, 07:11 AM
Description
No Konica Minolta logo at power up ("Planets" only), Configuration Page header is printing as Generic andp rinter driverfails when trying to acquire the device
information.
Solution
CAUSE: Incorrect settings.
SOLUTION: To change the Configuration Page header to Konica Minolta bizhub, please perform the following:
1.Access the Service Mode.
2. Select System 2.
3. Select Software Switch Setting.
4. Enter Switch No. "10".
5. Bin Assignment "00000000".
6. Hex Assignment "02".
7. Click on Fix.
8. Click on End.
9.Power theMFP OFF/ON.
10. Print another Configuration Page.Page Header should now be changed to Konica Minolta.

bhangdu
12-23-2010, 10:35 PM
All Done, Thanks a lot for helping me

Stirton.M
12-24-2010, 12:06 AM
No problem....any time eh...

Custom Search