View Full Version : C550 error C-C172
stathistec
12-30-2010, 11:13 AM
Good Morning.
i have a BizHub C550. i update the machine to version R6 and after that when the machine start up an error C-C172 appears
Thank you in advance.
B0265
12-30-2010, 12:32 PM
Check the setting of System 2 > Image Controller.
emujo
12-30-2010, 01:36 PM
To clarify... if you have a fiery this should be a 1, if not, it has to be a 0. I have had issues updating to ver R6 and each time it has happened I have to take the MFP back to the initial version and then back to R6. Emujo
stathistec
12-30-2010, 02:59 PM
Thank you to all
the problem was on image controller settings it was controller 2 i change it to 0 and everything works fine thank you again
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.