View Full Version : No duplex setting in VXL(pcl) driver C351

Custom Search

01-04-2011, 03:59 AM
Im having trouble in my driver setting in VXL(pcl) it doesnt give me a duplex option in that driver on in PS driver does that setting show. Also when I scan I cant get the scanned pages to combine as one pdf file, each scan gets a seperate page for one scan as one page at a time, I know there is a seperate page setting for scan I tried to turn it off then on and still scans as seperate pages. Any Help is greatly appreciated. Thanks

01-04-2011, 08:42 AM
ensure that a hard disk is installed for the scan issue.

To my knowledge, there is no VXL driver for the C351.

Konica Minolta Knowlegebase (

01-22-2011, 02:26 AM
Once the driver is installed go to the properties (not preferences) and you have to manually turn on the duplex option in the Configure tab. You must manually activate all the options in the driver that are on the machine, ie duplex, hdd, finisher, paper decks...

Custom Search