PDA

View Full Version : Konica 7020 error code F-35-1 Please Help


Custom Search


wabhaiwa
06-12-2007, 02:35 PM
HI every one,

I have a Konica Copier and recently a error came up.
The error code is F-35-1, Guys i would really appreiciate if you could help me out.

Thankz

nightshade
06-12-2007, 03:39 PM
Fuser error, here is the reset procedure.

Set SW2 (sub
power switch)
OFF and then
back ON, after set
to "0" the bit 1 in
DIP SW3 in 25
mode. (If you
switch power back
on without
releasing the
latch, the error will
recur.)

Custom Search