View Full Version : Canon IRC 624
xcopytech
06-15-2007, 02:38 PM
Hi,
I have message on Canon IRC 624 "replace fuser unit". Unit have been replaced but still have same message. How to clear message.
Thanks.
xcopytech@gmail.com
Copier_Guy
06-16-2007, 12:48 AM
Hi,
I have message on Canon IRC 624 "replace fuser unit". Unit have been replaced but still have same message. How to clear message.
Thanks.
xcopytech@gmail.com
I'm not familiar with that model. Is that a color ImageRunner? What model year is it?
xcopytech
06-18-2007, 07:01 AM
Basicly that is same machine as Canon CP 660 with some modification.
I have service manual for CP 660 but there is nothing about "replace fuser unit"
thanks.
regards.
ladybird
10-07-2007, 11:47 PM
Does this machine have a reader or not?This may be a daft question but have you replaced the fixer unit?
Mr Spock
10-08-2007, 12:03 AM
Cannot find this product but I found another bulletin that tells you to do this. Hope this helps.
Enter service mode COPIER>OPTION>BODY(level 2)>FX-MSG-SW and set to "0".
jonbonse
03-15-2011, 08:48 PM
Cannot find this product but I found another bulletin that tells you to do this. Hope this helps.
Enter service mode COPIER>OPTION>BODY(level 2)>FX-MSG-SW and set to "0".
Hi
Is it the same to get into service mode as current models (* 2,8, *)??
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.