PDA

View Full Version : Miscellaneous 3rd Party Vendor


Custom Search


Darryl.Ward
01-24-2011, 09:36 AM
I have a C200 in the field and have been asked to install a 3rd party vendor kit whick works with access cards. Having installed many such systems before I didn't think it would be a problem, but I can't seem to find the 4-pin connector to attach the device. On previous model the connector was always on the right hand side of the unit running alongside the scanner section. Has this changed or simply been ommitted on these models?

emujo
01-24-2011, 05:03 PM
On some MFPs the connector is routed beneath the cover that needs to be removed to pull the platen glass. BH 501/350 etc...Emujo

Darryl.Ward
01-24-2011, 08:58 PM
Yeah, I know about those cables and where they are.... question is, are they on the C200 or do I need a mount kit. The service manual mentions 2 types of mount kits, MK-718 & MK-723, neither of which are available in South Africa. It's not a problem to make one up, I just need to know which connector on the the mainboard to use and what the pinouts might be...

Stirton.M
01-25-2011, 04:09 AM
This install manual on the MK-718 should help


8056

Custom Search