PDA

View Full Version : konica minolta di 2010 error question


Custom Search


brent
01-24-2011, 06:16 PM
the copier came up with a c1038 code. can not reset. once it did finally reset it came up with a code 0x00f00201. the power supply was acually making noise. and the machine would work for a few copies. and then I tried to use the doc feeder and it came up with a 0x00d8136

I am going to replace the power supply first. but I wonder why the c1038 code is not listed in the service manual?

any ideas?

brent

brent
01-24-2011, 06:27 PM
I found a bulletin on this. sorry to have not checked the site first.

turns out it is either re seating the pwba and the mfb3 or replacing those boards. should be fun

brent

Custom Search