PDA

View Full Version : BizHub 180 Error message


Custom Search


copyman
02-03-2011, 03:40 AM
When using the doc feeder message comes up "Caution APS size error (A4)"
It is fine copying off glass. Note, this machine has the DF-605 reversing feeder, same feeder that is on the biz 200/250/350.
Machine recognizes the correct size paper in both paper drawers. Also machine is set to "inch".
Could only find ADF registration adjustment in service manual, no size adjustment.
Any ideas what this could be? Thanks in advance

ddude
02-03-2011, 04:34 AM
There should be an ADF size adjustment under service mode, under (of all places) image adjustments.

Custom Search