copyman
02-03-2011, 03:40 AM
When using the doc feeder message comes up "Caution APS size error (A4)"
It is fine copying off glass. Note, this machine has the DF-605 reversing feeder, same feeder that is on the biz 200/250/350.
Machine recognizes the correct size paper in both paper drawers. Also machine is set to "inch".
Could only find ADF registration adjustment in service manual, no size adjustment.
Any ideas what this could be? Thanks in advance
It is fine copying off glass. Note, this machine has the DF-605 reversing feeder, same feeder that is on the biz 200/250/350.
Machine recognizes the correct size paper in both paper drawers. Also machine is set to "inch".
Could only find ADF registration adjustment in service manual, no size adjustment.
Any ideas what this could be? Thanks in advance