PDA

View Full Version : ISW via USB Prob


Custom Search


JR2ALTA
02-10-2011, 05:06 AM
Hey, I am Kyo guy. (Much better service mode!) but anyway, I installed ISW, got my firmware, got my USB, but I get an error "Cannot connect USB" or something like that. It's a netbook so I don't have parallel, and I think the machine was a bh250 so there is no CF (if a 250 has a CF, my bad but this model aint got it)

Thanks!

BIG PAPA
02-10-2011, 03:30 PM
A bizhub 250 is done by CF. U Need to remove the little cover that is just under the right side of the scanner just in front of the network connection. the cf slot is in there.

emujo
02-11-2011, 05:46 PM
Keep in mind that depending on what firmware you are updating, there are 2 procedures. One is done by simply turning MFP on with firmware on CF card, other is done by ISW. EMujo

Custom Search