View Full Version : bizhub 250
Mr Bean
02-12-2011, 09:37 AM
Hi, there.
Can you tell me how to upgrade bizhub 250 to become bizhub 350?
Is it possible ? Thank you !
fixthecopier
02-12-2011, 02:18 PM
There is no way to do it. The 350 is 10 pages a minute faster.
i think you can only chip the 200.
not the 250
TheOwl
08-22-2012, 11:33 PM
Wheel the machine into heavy traffic and once it is in a million pieces, buy a BH350.
Hansoon
08-23-2012, 06:06 AM
Even when you are able to manipulate the logics of the machine it will not work because the BH-350 uses a different laser unit.
Hans
pepper38_cnd
08-23-2012, 11:18 AM
I sell a kit for conveting a BH200 to a BH350 but I don't know if it is the same BH250 to BH350.Dev
Hansoon
08-23-2012, 06:21 PM
Only thing I know for sure is that the laser unit "Printhead Assy" with # 4041-0751-00 is for the BH-200, 250, 282, 222, 7728 and # 4040-0751-00 is for the BH-350, 362.
Hans
emujo
08-23-2012, 08:55 PM
Wheel the machine into heavy traffic and once it is in a million pieces, buy a BH350.
Or, you can plug into a 220vac outlet...then you get a bizhub 500..Emujo
TheOwl
08-23-2012, 11:30 PM
Or, you can plug into a 220vac outlet...then you get a bizhub 500..Emujo
Would that mean that if sent you an Australian C6500, it would actually be a C3250? lol
copyman
12-07-2012, 12:08 AM
I have installed speed chip in about 25 Biz 200's. Machine then thinks it is a 350 and runs at 35 ppm. When you go into tech rep mode display show biz 350. It works great.
Like the others said I was told you can't make a 250 in a 350, only the biz 200
Hansoon
12-07-2012, 06:00 AM
Like the others said I was told you can't make a 250 in a 350, only the biz 200
Yep, cause of the laser unit. (PH or print head as KonicaMinolta calls them)
Hans
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.