bizhub 250

[Mr Bean]

Hi, there.
Can you tell me how to upgrade bizhub 250 to become bizhub 350?
Is it possible ? Thank you !

[fixthecopier]

There is no way to do it. The 350 is 10 pages a minute faster.

[Tec1]

i think you can only chip the 200.
not the 250

[TheOwl]

Wheel the machine into heavy traffic and once it is in a million pieces, buy a BH350.

[Hansoon]

Even when you are able to manipulate the logics of the machine it will not work because the BH-350 uses a different laser unit.

Hans

[pepper38_cnd]

I sell a kit for conveting a BH200 to a BH350 but I don't know if it is the same BH250 to BH350.Dev

[Hansoon]

Only thing I know for sure is that the laser unit "Printhead Assy" with # 4041-0751-00 is for the BH-200, 250, 282, 222, 7728 and # 4040-0751-00 is for the BH-350, 362.

Hans

[emujo]

Wheel the machine into heavy traffic and once it is in a million pieces, buy a BH350.

Or, you can plug into a 220vac outlet...then you get a bizhub 500..Emujo

[TheOwl]

Or, you can plug into a 220vac outlet...then you get a bizhub 500..Emujo

Would that mean that if sent you an Australian C6500, it would actually be a C3250? lol

[copyman]

I have installed speed chip in about 25 Biz 200's. Machine then thinks it is a 350 and runs at 35 ppm. When you go into tech rep mode display show biz 350. It works great.
Like the others said I was told you can't make a 250 in a 350, only the biz 200

[Hansoon]

Like the others said I was told you can't make a 250 in a 350, only the biz 200

Yep, cause of the laser unit. (PH or print head as KonicaMinolta calls them)

Hans