C252P Contact section

[backspace]

What is procedure for removing "contact section" on bizhub C252. I need to change contact (P/N: 4038 2222 01).

[Stirton.M]

Pretty much remove everything on the backside. Be careful of the two ribbon cables on the right side of the control board cage. Looking from the back, the left side plastic panels (the one covering the cage and the other covering the scanner unit, must be removed. Upper rear panel removed. Both fan ducts above the cage removed. The cage itself removed. The rest I cannot recall specifically, but it should be pretty obvious from that point on what you need to remove to achieve what you need to do.