View Full Version : Minolta Bizhub C350 - error code
jhanks
06-28-2007, 02:20 AM
Anyone know what error code c-12c0 is - just started showing up and can't seem to figure out what happened...
Thanks in advance
Jason
knightfall
06-28-2007, 02:49 AM
C12C0 Hard disk recognition error
Unable to communicate between the hard disk and MFP Control Board (PWB-MFP).
nightshade
06-28-2007, 03:11 AM
Replace the HD with a generic one for a Laptop.
jhanks
06-28-2007, 05:26 AM
Thanks for the help - does there need to be any software loaded on the HD? or just a pre-formatted hd for a laptop?
I am not a technician - but have computer skills
Thanks
nightshade
06-28-2007, 05:02 PM
Fresh out of the box, then you need to format it through the copier.
Bizhub
06-28-2007, 08:00 PM
We find that enhanced IDE drives don't work ! Has anyone else had that problem ?
We are using Toshiba 40gb drives, let me know what you are using.
Regards
nightshade
06-28-2007, 10:10 PM
We find that enhanced IDE drives don't work ! Has anyone else had that problem ?
We are using Toshiba 40gb drives, let me know what you are using.
Regards
Never looked, I plug a part # into my computer and a couple days later I get a 40gig.
Maybe this is the answer to why the last 2 I tried in a 8031 didn't work????
Scott_Lewis
06-29-2007, 03:15 AM
We find that enhanced IDE drives don't work ! Has anyone else had that problem ?
We are using Toshiba 40gb drives, let me know what you are using.
Regards
I've tried this in the past with dismal results. I think it was on an embedded fiery controller....... Found the original drive had a password protected configuration profile. Finally gave up and purchased the 10x overpriced OEM drive.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.