PDA

View Full Version : minolta DiALTA Di250

Custom Search


kites182
06-28-2007, 02:20 AM
my copier has an error of c0400. i don't know where's the problem. thanks for the help!!! have a nice day!
Scott_Lewis
06-29-2007, 03:07 AM
I want to tell you it is a scanner lamp failure. But, nowhere in my downloaded Di250 or Di251 manuals is there a mention of a C0400 code.
Luther
06-29-2007, 01:18 PM
It is an exp. lamp failure, I would clear the code with trouble reset then check to see if the lamp comes on during warmup,chances are the lamp is bad or the metal foil on the lamp has a break in it, good luck
kites182
06-29-2007, 05:30 PM
I want to tell you it is a scanner lamp failure. But, nowhere in my downloaded Di250 or Di251 manuals is there a mention of a C0400 code.


im sorry its not c0400. It's C004C. i hope i can get a reply.

actually it's not the only code i am getting. i'm also getting a C0F32 and a C0500 code.

hope u can help me. thanks in advance bro!!
kites182
06-29-2007, 05:31 PM
It is an exp. lamp failure, I would clear the code with trouble reset then check to see if the lamp comes on during warmup,chances are the lamp is bad or the metal foil on the lamp has a break in it, good luck


im sorry its not c0400. It's C004C. i hope i can get a reply.

actually it's not the only code i am getting. i'm also getting a C0F32 and a C0500 code.

hope u can help me. thanks in advance bro!!
Luther
06-29-2007, 05:42 PM
c004c is m5 failure to turn(ozone fan) c0032 is faulty toner density sensor,c0500 is fuser warm-up error
kites182
06-29-2007, 05:54 PM
c004c is m5 failure to turn(ozone fan) c0032 is faulty toner density sensor,c0500 is fuser warm-up error

thanks!
ftgsubvet
08-10-2012, 06:03 AM
c004c is m5 failure to turn(ozone fan) c0032 is faulty toner density sensor,c0500 is fuser warm-up error

I am getting the co500 error on a i250. Can you tell me the usual cause for this?

Thanks in advance.

Custom Search