PDA

View Full Version : FK-503 Memory Module


Custom Search


mrfuser
02-16-2011, 06:22 PM
Does anyone know what the add on memory module for the FK-503 is called? I can't seem to remember and i know you need it to activate network fax option.

Thanks all!

Kelly

emujo
02-16-2011, 09:55 PM
The FK-503 comes standard with a 32MB mem module, EM-303,304,305 are upgrade memory 32MB,64MB, and 128MB respectivly. We had a ton of extra 32 mb chips as the sales people would always purchase the extra chip, blissfully unaware that the fax came with this. Emujo

aleksander
02-17-2011, 12:49 AM
Does anyone know what the add on memory module for the FK-503 is called? I can't seem to remember and i know you need it to activate network fax option.

Thanks all!

Kelly
you need SU-501 to activate the network fax.

bronco31
02-17-2011, 12:59 AM
im also mixed up.. so the fax "card" has 32 mb built-in right? ( mounted closeset to edge of main board i believe)
do we need another SU-501 (32mb mem) ?
which goes where?

Guy

Hansoon
02-17-2011, 06:29 AM
The "Fax" module is the left one with the 4pcs chips going in slot marked "A". The one in slot "B" is the memory module.

http://img341.imageshack.us/img341/4426/bizhub350modules.jpg (http://img341.imageshack.us/i/bizhub350modules.jpg/)

SU-501 is the left module which comes with the FK-503 and has 32mb memory. It allows also for IP-Scanning. In case slot A is occupied you have to replace the existing module with the SU-501 module. Slot B should always have the memory module with the 3 chips shown above, otherwise is printing not possible. Networkfax is a software application. Until now only for XP. For W7 I haven't seen it yet.

Hans

Custom Search