dipakpatel
02-21-2011, 01:28 PM
i gave a 2-side mode from bypass and i wanted 3 sets of originals.
The problem occurs in all type of paper size i.e A5,A4,A3,folio e.t.c
result:-
--1st set of copy was ok.
--2nd set was not ok i.e paper was printed on both with same content .To elaborate one side content was printed on both side of paper.
--Paper jamming occured in 3rd set.
Note:
--This happens only for more than 2 sets i.e. when we want only 2 sets of original then it works fine..
--Also for more than 2 sets there is no problem when done using any casette tray but problem occurs only from bypass
Any help is greatly appreciated....
The problem occurs in all type of paper size i.e A5,A4,A3,folio e.t.c
result:-
--1st set of copy was ok.
--2nd set was not ok i.e paper was printed on both with same content .To elaborate one side content was printed on both side of paper.
--Paper jamming occured in 3rd set.
Note:
--This happens only for more than 2 sets i.e. when we want only 2 sets of original then it works fine..
--Also for more than 2 sets there is no problem when done using any casette tray but problem occurs only from bypass
Any help is greatly appreciated....