PDA

View Full Version : Miscellaneous konica print controller IP421 TCP/IP Network Information is Disabled???


Custom Search


kmcopytech
03-03-2011, 02:48 PM
Print controller IP421 Configure status Page:

---------------------------------------------
Unit serial No:B66390 version:05.75c
network address: 00:40:af:2c:9a:f8
novell network information disabled
tcp/ip network information disabled
appletalk network information disabled

----------------------------------------------

novell inactive
peer-to-peer connection information
printer name:kon_b66390
Appletalk Inactive
TCP/IP Inactive

----------------------------------------------


How set TCP/IP Network Information to Enabled ????

Thanks!!!

Jack. kmcopytech@gmail.com

dallas
03-03-2011, 07:36 PM
Restore to Factory defaults

- Remove the KN-303 from the IP-412.
- Set the Jumper OP2 from x|2|3 Position to 1|2|x Position.
- Connect the KN-303 to IP-421 and turn on the Machine.
- Wait 5 minutes.
- Move the Jumper back.

kmcopytech
03-04-2011, 02:13 AM
OK.

Thanks!!!

Custom Search