scotsman60
03-04-2011, 12:10 AM
OK,
I'm working through commissioning problems on a 1050 EP - basically trying to diagnose why my stacker won't work.
I've hooked up to the Web Utilities on the main body of this machine (not the controller) - using Google Chrome (thanx to those who helped me work round the IE problem).
But now I need to enter the CE username and password.
The service manual says the Username is always "ce" and can't be changed - that's good.
It also gives a default password, which doesn't work in my case.
Anyone know how to recover the lost password?
Or is there some odd way of entering it that I should know about?
Thanx in advance for any help that gets me a working stacker......
Also - is it usual to have two network connections running to this printer all of the time? One for the port on the main body and one to the controller?
Doug
I'm working through commissioning problems on a 1050 EP - basically trying to diagnose why my stacker won't work.
I've hooked up to the Web Utilities on the main body of this machine (not the controller) - using Google Chrome (thanx to those who helped me work round the IE problem).
But now I need to enter the CE username and password.
The service manual says the Username is always "ce" and can't be changed - that's good.
It also gives a default password, which doesn't work in my case.
Anyone know how to recover the lost password?
Or is there some odd way of entering it that I should know about?
Thanx in advance for any help that gets me a working stacker......
Also - is it usual to have two network connections running to this printer all of the time? One for the port on the main body and one to the controller?
Doug