[Dead] Konica 1050e sc41-03 scanner dead

[copycorner]

After power up the scanner does not light or move. Fault code SC41-03 displays. I blew out the home sensor and I rotated the drive moter by hand and moved the scanner out of home position and restarted but still nothing. I unplugged the power for 5 minutes and restarted without any luck. Any suggestions would be appreciated.
Thanks

[albasoul06]

R E P L A C E D
Scanner drive board (SDB)
Scanner motor (M27)
Scanner home sensor(PS51)

[copycorner]

Dead Konica sc41-03 Scanner inop

Thanks for the reply albasoul06. I'll start with the sensor.