PDA

View Full Version : Dead Machine Konica 1050e sc41-03 scanner dead


Custom Search


copycorner
03-04-2011, 08:11 PM
After power up the scanner does not light or move. Fault code SC41-03 displays. I blew out the home sensor and I rotated the drive moter by hand and moved the scanner out of home position and restarted but still nothing. I unplugged the power for 5 minutes and restarted without any luck. Any suggestions would be appreciated.
Thanks

albasoul06
03-05-2011, 11:01 AM
R E P L A C E D
Scanner drive board (SDB)
Scanner motor (M27)
Scanner home sensor(PS51)

copycorner
03-06-2011, 01:12 AM
Thanks for the reply albasoul06. I'll start with the sensor.

Custom Search