PDA

View Full Version : Dead Machine Konica Minolta C352 Control Panal Repair


Custom Search


Brischaffer
03-07-2011, 09:08 PM
Hello Everyone,


I was wondering if there was anybody other then KM that i can send a C352 Control Panal back to get reparied. I've tried Hytech Board Repair and CRC Systems-The Touch Screen Repair Depot. Neither did I have luck with. If anyone knows of anyone could you please let me know.

Thanks

Brian

ddude
03-08-2011, 03:17 AM
Is it only the touch screen that's not working? There are known issues with the touch panels. See the post here:

http://www.copytechnet.com/forums/konica-minolta/47266-touch-panel-problem.html

If you have KMBS access, there is a FOC program for replacements.

mitchl
03-21-2011, 10:06 PM
Just another piss poor vendor (China I'm sure) using the wrong epoxy which expands when its subjected to heat and moisture, I swear I must have replaced 500 of these at 200 plus a clip...... Fuck you Konica Minolta!

ddude
03-22-2011, 04:40 AM
The same mfg for Ricoh, I assume, because we've done oodles of Ricoh panels to boot!!

mitchl
03-22-2011, 04:46 PM
Probably the same shit Chinese vendor, I'm so over the crap coming out of that place.

ni311
03-22-2011, 08:37 PM
The cheaper, the better... Every company is trying to cut costs without thinking to quality because the first thing a customer is noticing is the price... Remember the old DI250/350 that was made in Japan? I never had a clutch problem with them, not like the current series...

Custom Search