pudgi300
03-07-2011, 08:25 PM
Hi
I am having a problem with Tray #4 jams in the drum area. Reg is fine. The paper goes up in the drum area between the drum and developer. The paper i take out the registration is perfect. It is like a seperation problem. Replaced all rollers and clutches in tray 4.. Also 2 clutches in rear of pf701 for tray 4. I even swapped tray #5 with Tray#4 and that one will cause jams in the drum area with tray 4 selected. Does not matter what paper i use but 20lb 8 1/2x11 works better. I am logging 31-02 and 14-01's. I can run out of any other tray with no problem. Has anyone ever seen this one before.
Later Pudgi300
I am having a problem with Tray #4 jams in the drum area. Reg is fine. The paper goes up in the drum area between the drum and developer. The paper i take out the registration is perfect. It is like a seperation problem. Replaced all rollers and clutches in tray 4.. Also 2 clutches in rear of pf701 for tray 4. I even swapped tray #5 with Tray#4 and that one will cause jams in the drum area with tray 4 selected. Does not matter what paper i use but 20lb 8 1/2x11 works better. I am logging 31-02 and 14-01's. I can run out of any other tray with no problem. Has anyone ever seen this one before.
Later Pudgi300