konica minolta c2403... again

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • brent
    Service Manager

    Site Contributor
    1,000+ Posts
    • Nov 2008
    • 1159
    #1

    konica minolta c2403... again

    so we all know that the sensor gives us problems. but I had another issue with this code. I had a huge humming issue with this toner drive unit. so I replaced it with a good used one. I thought. the noise went away. and got the machine toned up. now 3 weeks later the toner bottle was bound yesterday. so i replaced the toner drive again. today it only c2403 codes out. so Ireplaced the sensor in questions. but the drive is very irratic again. could I just be dealing with bad motors in the toner drive? I watch it just spin and it will not stop in home position. any help would be welcome.


    brent
    Tags: bad, code, codes, irratic, issue, konica, konica minolta, minolta, toner, unit
    • Zeldaman
      Senior Tech

      500+ Posts
      • Mar 2011
      • 946
      #2

        Comment

        • brent
          Service Manager

          Site Contributor
          1,000+ Posts
          • Nov 2008
          • 1159
          #3
          I found this document. even though the machine is a piece. we still got to maintain them. until they die. or fall over. I am going to review this and look at it again this afternoon. thought it was very interesting so I am posting it
          Attached Files

            Comment

            Previous template Next
            Working...