PDA

View Full Version : Jamming C550 Jamming tray 4 only


Custom Search


tech51
03-15-2011, 09:12 PM
Hi all, Ive got a c550 that intermittantly jams from tray 4. The lead edge of paper just exits the feed assembly and doesnt make it to the next set of rollers. The jam code is logged as j17-10. Ive changed feed tyres the mag. clutch, torque roller roughened up the shafts and replaced the one way feed clutches on the feed rollers. The LCC drive has been rebuilt with all new parts. The jamming is intermittant in the sense that it will jam consistently, then for no apparent reason feed perfectly for a day or two, then start jamming again.
All the other trays feed OK so any thoughts would be appreciated....

Custom Search