Canon 4050 jinx

[Gman]

We recently took an old 4050 as a T&M call for jamming. Replaced some broken drum picker fingers, now have blanks. Does anyone remember this dino? Please help if you can.:confused:

[kwazimoto]

well if you took the drum out of the machine if is the primary in place and second the dv unit handle locked back over ???

[Gman]

Thanks for the suggestions Kwaz. Everything back in place. Checked power from HV- checked dead with one meter & good with another. May have had bad batteries:)

[Gman]

Problem solved! Bad MC:)

[Auzzie]

Could be the corrona wire cleaner some times that stay on wire causing blank.

[blackcat4866]

I know you've got it solved.

I would have guessed a shorted s/t unit. That would have accounted for poor separation (i.e. broken drum claws) and blank copies (transfer loss).

=^..^=