Bizhub c450

[thuo]

Hi
i have a bizhub c450 with embedded controller but cannot print thru network.
i suspect i am making the wrong selection of the controller. there are 4 controllers options .which controller should i use and which mode (mode 1, 2,3)
thanks

[mrwho]

Controler 0 - The mode, afaik, is irrelevant.

As for being unable to print, if you can't get around it (does it ping? can you access it via web browser?) then you might need to reset the nic via a special firmware card.

[empiru]

Can you print a test from the copier controller menu? If yes, than it is not a matter of setting the Controller, but a matter of the driver you use.

[niodar]

Hi,
try go to service mode-system input-peripheral setting..
choose the controller no 3...