MikeyP
03-18-2011, 09:01 PM
Hi guys,this printer is giving a random 2000 service code.
Has done over a million and has had two service kits
.
Following has been changed to overcome this problem.
Main motor,Engine PCB ,Drive unit.
Would appear to be no friction on drum unit and fuser has been swopped.
Any thoughts or experience of this problem would be much appreciated
Has done over a million and has had two service kits
.
Following has been changed to overcome this problem.
Main motor,Engine PCB ,Drive unit.
Would appear to be no friction on drum unit and fuser has been swopped.
Any thoughts or experience of this problem would be much appreciated