good day,this copier is showing service spanner, i need help to Clair the spanner.thanks in advance.
-
-
DESCRIPTION: How to reset the PM counter.
SOLUTION: Perform the following:
1. Enter the 25 mode (turn the copier ON while holding down the 2 and 5 keys)..
2. Use the up arrow to display [3: PM Count ?] and press the OK button.
3. Press the RESET button.
4. Press the YES button.
5. Input the last two digits of the year, and press OK.
6. Input the month in a two digit format, and press OK.
7. Input the day in a two digit format, and press OK.
8. Turn the main switch OFF/ON to exit the adjustment mode.' "But the salesman said . . ." The salesman's an asshole!'
Mascan42
'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.'
Ibid
I'm just an ex-tech lurking around and spreading disinformation!
Comment