Spidula
03-20-2011, 02:17 PM
Good afternoon all!
I was working on a C353 with a Fs609 (I think) attached.
When they were doing fold and staple jobs it would spit it one job and then register a jam at fuser exit/fns entrance, but nothing there. Anyone had this.
I couldn't investigate thoroughly as they were closing so am back there Monday, but thought I would post for any info.
Cheers folks
Spid :o)
I was working on a C353 with a Fs609 (I think) attached.
When they were doing fold and staple jobs it would spit it one job and then register a jam at fuser exit/fns entrance, but nothing there. Anyone had this.
I couldn't investigate thoroughly as they were closing so am back there Monday, but thought I would post for any info.
Cheers folks
Spid :o)