View Full Version : Konica 8031
Showman
07-18-2007, 11:31 PM
I received an error c-0016 indicating a black toner motor problem. I determined the imaging unit was frozen and replaced it. After two printouts, I received the error C-OF37.
Can anyone help with this?
Thanks.
wagon
07-19-2007, 12:17 AM
I doubt it is the imaging unit- you probably have hard packed toner at the bottom of the toner hopper! Vac it out and see how it goes.
AusiTech
07-19-2007, 07:24 AM
C0F37
In the manual it relates to cyan but i know it's wrong!! It's actually relating to the black.
The IU has 4% higher than its target value.
My guess is you replaced a faulty IU with another faulty one.
Problem is if you test another one and it doesn't fix it... the chip resets and its dead.
I recommend shaking IU's by tipping up on ends whilst in bag several times, especially Biz hub colour range.
There is a reset button under the right hand side door but usually open/close door works for this error.
:cool:
random
07-19-2007, 10:20 AM
From memory the cyan and black hoppers are driver off the same motor. You can find this behind the cover that the T-Bar clips into. I have had one of these somehow?? being unplugged.
AusiTech
07-19-2007, 12:14 PM
LOL how the hell that happen:eek:
random
07-20-2007, 06:59 AM
I think the cadet got a bit over excited doing the refurb
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.