View Full Version : Roller Lines on C8000
Francois d
03-22-2011, 09:19 AM
Hi All
Can anyone help I am getting roller line on a C8000 from the fusers, is there anyway to fix this?
Christian_W
03-22-2011, 08:25 PM
Hello Francois d,
in the adjustment mode there is a mode to polish the fusing roller.
Adjustment -- 02 Execute Adjust operation -- Fusing Refresh Mode
For more information about this refresh mode you can see the user guide from the main body
Christian
ColorGOD
03-25-2011, 04:19 PM
Better off just replacing the roller and turning off the fuser refresh function. The polishing function is causing the fine fuser roller lines.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.