PDA

View Full Version : Miscellaneous service mode


Custom Search


roho
03-23-2011, 08:39 PM
recently taken over a account-previous vendor has changed @ service mode password.
Is there a master reset, or back door in?
Thanks

roho
03-23-2011, 08:40 PM
sorry-various bizhub models c350 etc.
Thanks!

eg101
03-23-2011, 09:53 PM
on some models if you go to trouble reset, then Stop 00 Stop 01 it will get you into tec rep mode.

CKiiza
03-24-2011, 07:00 AM
I tried that on C353 and it still asks for the password. I wish there were another solution for that model

strider5555
04-07-2011, 10:07 PM
Only 2 ways to get in. Talk to previous vendor and get password, or call Konica Minolta. They will most likely say you would need to reset/replace the NVRAM.

acusso1234
04-07-2011, 10:10 PM
I tried that on C353 and it still asks for the password. I wish there were another solution for that model
92729272

aleksander
04-08-2011, 04:36 AM
92729272
that's not a service mode password.

acusso1234
04-08-2011, 10:23 AM
This is the password that the BH color printers ask you when you go into trouble reset mode to go in service mode.

mrwho
04-08-2011, 10:38 AM
I had that problem on a bh420 (http://www.copytechnet.com/forums/konica-minolta/48314-unknown-tech-mode-password.html?highlight=) and solved it going through trouble reset and then stop-0-0-stop-0-1. I then did Stop-0-Clear and then I disabled the password.

Custom Search