View Full Version : Konica Minolta C250p how to extend life of image units
copyalbania
04-05-2011, 04:53 PM
Hello friends,
I have been servicing Konica Minolta Bizhub C250/252 and in many cases i ahve used long life of the drum units from the service mode stop, 0, c.
Now i have in my workshop a Bizhub C250p but i do not know hot to extend the life of the image units.
Please someone help to resolve !!
Chip Resets SA
04-05-2011, 05:20 PM
Hi
Take a look at Chip Resets SA | South African Chip Resetters (http://www.chipresets.com) you can buy image unit chips that reset the count on the IU and extend the life of your IU, the developer can last for a number of resets.
copyalbania
04-05-2011, 05:29 PM
yes but i want to extend life from the service mode because it is an urgent riparing. also i have ordered the chips.
Is there any way to extend life like bizhub c250?
Chip Resets SA
04-05-2011, 05:33 PM
No the chip has a count which has completed its revolutions.
copyalbania
04-05-2011, 05:38 PM
my friend i have extended the life of the bizhub c252/252/350/450 and works for sure , the job goes on. i have done this procedure go to service mode and than stop, 0, c.
try it and see
ni311
04-06-2011, 08:19 AM
So, from what you said, you cannot enter in Service Mode to enter your combination. From what I know, it is a software that emulates the touch screen of a copier and the connection between your PC and the printer is through a serial cable.
copyalbania
04-06-2011, 10:25 AM
do you know where i can find the software and the way how to conect it?
boanda
04-06-2011, 01:15 PM
U can download it from KM site if u r a official tech
copyalbania
04-06-2011, 05:41 PM
U can download it from KM site if u r a official tech
hello,
i do not work any more for km i have my own work shop now.
anyone to help me?
viorel
07-15-2013, 08:32 PM
Hello friends,
Now i have in my workshop a Bizhub C250p but i do not know hot to extend the life of the image units.
Please someone help to resolve !!
Hello my friend.
How you solved the imaging unit reset? I dont have service manual and i dont know which is procedure to enter the service mode.
Can you explain me?
Thx!!
drimouxlas
07-15-2013, 08:44 PM
Jig panel is the one you are looking for and can be found here. Free for everyone Support & Drivers Search Results | Product: bizhub C250P / File Type: Utilities (http://onyxftp.mykonicaminolta.com/Download/SearchResults.aspx?productid=850&filetypeid=5) at the bottom has pdf info and guide good luck
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.