PDA

View Full Version : C353p Flushing problem!


Custom Search


boanda
04-11-2011, 11:30 AM
I cant flush machine. Every time when i put cf card(4 card tried) I see on display "invalid card"?
Its not firs machine trying to flush, so I hnow to make a firmware, until now. +machine want boot up now:confused:

I had booting up problem with other machine few week ago, flushed it and now it works fine

rprem
04-11-2011, 12:17 PM
its a 128 mb cf card and use firmware imaging tool kit,card must be a problem

boanda
04-11-2011, 01:50 PM
I tried 4 different cards,firmware imaging tool(2.1.7 and 2006 ) want read card and i made those in cmd, on the end of each process i see "verifying...OK"

Zeldaman
04-11-2011, 03:58 PM
Hi there! Had a similar problem:board was gone (wrong colours,grey background) install the new board (!) and no firmwareupdate is possible. At the end there were 2 pins missing (broken!) and 2 badly bend. Ordering a new board then it was OK.
Greetings.....

pantsman
04-11-2011, 04:37 PM
I cant flush machine. Every time when i put cf card(4 card tried) I see on display "invalid card"?
Its not firs machine trying to flush, so I hnow to make a firmware, until now. +machine want boot up now:confused:

I had booting up problem with other machine few week ago, flushed it and now it works fine

Excuse me, but you don't want to flush the machine at all..
what you want to do is flash the machine

Custom Search