PDA

View Full Version : B920 Light on Trailing edge (2nd side)


Custom Search


Eugene74
04-15-2011, 11:51 AM
Good day

Wonder if antbody could assist me with this problem. I've got a B920, machine got 1000000 copies on, and been serviced (Full PM) not to long ago. Now suddenly machine is making light band right at edge of second side trailing edge, checked and cleaned transfer/separation corona for arcing, because to me it looked like transfer problems. Checked paper edges for nicks as it went through paper path the first time, but edges are smooth. What I then did was run first side, and took paper and put it back in cassette and hope that problem would also appear, but this way there were no light band on trailing edge.

By now I've no idea what could cause this problem. Could anybody please assist me. Also included a scanned copy of problem.

Many Thanks.

Eugene9375

Custom Search