doma873
04-18-2011, 06:16 AM
Hi All
I have an issue with a C500 printing SRA3 to the sub tray of the finisher. The client wants it to print to the main finisher tray.
I thought there was a dip swich to do this but can't find it anywhere. Any IDEAS..
Regards
Dom
I have an issue with a C500 printing SRA3 to the sub tray of the finisher. The client wants it to print to the main finisher tray.
I thought there was a dip swich to do this but can't find it anywhere. Any IDEAS..
Regards
Dom