Thecopyguy
04-19-2011, 08:44 PM
Hello All,
Have a C280 thats gone through 2 full Cyan toner bottles in the last week. At first I suspected a rogue empty toner had been installed but I kept an eye on the replacement and sure enough after two days it was nearly empty and only done about 500 prints.
Toner level reading was normal (6.9%) when I fitted the 2nd toner and I even looked into the waste toner bottle but wasn't obviously full of unused Cyan toner.
Any ideas anyone before I go for another look tomorrow??:confused::confused:
ps. Other 3 colours are working normally.
Have a C280 thats gone through 2 full Cyan toner bottles in the last week. At first I suspected a rogue empty toner had been installed but I kept an eye on the replacement and sure enough after two days it was nearly empty and only done about 500 prints.
Toner level reading was normal (6.9%) when I fitted the 2nd toner and I even looked into the waste toner bottle but wasn't obviously full of unused Cyan toner.
Any ideas anyone before I go for another look tomorrow??:confused::confused:
ps. Other 3 colours are working normally.