PDA

View Full Version : Imaging Unit


Custom Search


lindau
04-22-2011, 07:01 PM
We were trading out our yellow imaging unit on the Konica 8020 for a new one -when we accidentlly tipped it, all this dirty yellow tonor came out of the new unit- almost looks like yellow mixed with black, is his normal and should it be there? We installed it and now we are getting these errors.

Then we got an error P-8, which is no longer showing and the new error showing is P-21
Thanks.

bigdcopy
04-22-2011, 07:47 PM
call a tech!!!!! - that is starter/developer that came out and it critical that the correct ammount is present to mix with the toner otherwise you will get codes and poor CQ

bigdcopy
04-22-2011, 07:57 PM
Just went to Konica web site - call a salesman that is a discontinued machine

JustManuals
04-22-2011, 09:01 PM
This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from
Just Manuals | The Internet's largest selection of manuals | Instant Downloads (http://www.justmanuals.com)


Paul@justmanuals.com

minimerlin
04-22-2011, 09:05 PM
Unless you gather up all the CLEAN spilt powder that you dropped and replace in the Image unit, you will have to bite the bullet and purchase another one!! Did you not follow the enclosed instructions for the unit?:(

Custom Search