Hi everyone I have Sammy 6545 with a blank screen except for a vertical and horizontal line through the screen. Nothing else works. Any help is appreciated. Please do not post a manual spam to this post. I have the manual already.
tseto
06-22-2011, 06:08 PM
if you remove the back panel after pulling the power cord, on the bottom right is the main cpu board. on the bottom of the cpu board is a 2 connector plug with a red and black wire that goes to a 3.6 volt back battery, and a 3 connector plug that goes to a thermistor. for sensing ambient temperature. unplug both , go have coffee , reconnect both plugs, power up and see if the machine boot up properly
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.