PDA

View Full Version : bizhub C35 jam from tray 2


Custom Search


finni72
05-03-2011, 08:20 AM
Hi!

I have an C-35 that jam's in the tray all the time.
The machine has only taken 7600 prints.
I have tried to clean rollers and the clutch.
Have any of you had this problem, and is it at bulletin on this?

Best regard Finni

Zeldaman
05-03-2011, 08:35 AM
Hi there!
Same problem at 5 machines, changed rolls, clutch doesnīt work. Then i take the spring of the sep-roller & pressed it for lesser pressure of the sep-roller, now itīs working. Itīs the same with K-M DFīs, the seperation-pressure is to high.
Greetings...

finni72
05-24-2011, 02:02 PM
Thanx!

I have tried to do this but it didn't help.
Any other ideas?

ineo+6501
05-24-2011, 04:02 PM
Numerous problems with this box. There is new firmware for the C35 which fixes most problems. Not sure if jamming is one of them though.

Custom Search